RO Sistema di trattamento delle acque
Reverse osmosis (RO) water treatment systems are widely used for purifying water by removing impurities and contaminants through a semi-permeable membrane. The process involves applying pressure to water, forcing it through the membrane, which blocks unwanted particles such as salts, batteri, and chemicals, while allowing clean water to pass through.
Influent water quality:Tap water, acque sotterranee, seawater or other water sources
Capacità: 1-50 t/h
Main material: Stainless steel
Desalination rate: ≥90%
Scope of application: food and beverage industry, hotel and catering, community water supply system, chemical industry, ecc.
Tel: +86 371-86582811
Assalire & WhatsApp: +86 15239453015
E-mail: info@hadofmachinery.com
- Working Process
- Parametro
- Features
- Details
- Our Service
1.Pre-filtration
Raw water passes through pre-filters, such as sediment and carbon filters, to remove large particles, chlorine, and other impurities that could damage the RO membrane.
2.Pressurization
A high-pressure pump increases the water pressure to overcome the osmotic pressure and force water through the semi-permeable RO membrane.
3.Reverse Osmosis
Water is pushed through the RO membrane, which allows only water molecules to pass while blocking salts, minerals, batteri, and other contaminants.
4.Post-filtration
The purified water is further filtered using a post-carbon filter to enhance taste and remove any residual impurities.
5.Storage and Distribution
The purified water is stored in a tank or distributed directly for use. Wastewater (concentrate) is discharged through a separate line.
| Influent water quality | Tap water, acque sotterranee, seawater or other water sources |
| Capacità | 1-50 t/h |
| Main material | Stainless steel |
| Conductivity of water (sistema di osmosi inversa primaria) | ＜10μS/cm |
| Conductivity of water (sistema di osmosi inversa secondaria) | ＜2μS/cm |
| Power supply | 380V AC 50Hz three-phase four-wire/220VAC50HZ |
| Relative humidity | ≤80%, Nessun acido forte, Alcali forti e altri gas volatili, no strong electromagnetic interference |
| Installation site requirements | The ground is equipped with a waterproof layer and floor drain to ensure smooth drainage |
| Control method | Automatic, manual |
| Desalination rate | ≥90% |
| Influent water temperature | 15℃-35℃ |
| Recovery rate | 50%-75% |
| Applicable industries | Chemical, cibo, medical, civil, agriculture, ecc. |
1. High-efficiency filtration capacity
Remove more than 97% of dissolved salts, heavy metals, batteri, viruses and other pollutants in water. Provide high-quality pure water to meet the needs of multiple uses.
2. Energy saving and environmental protection
High water resource utilization rate, reduce wastewater discharge through recycling devices. No chemical additives are required to reduce environmental pollution.
3. Easy to operate
Adopt a fully automated control system to monitor the operating status and easy to operate. Equipped with automatic cleaning function to extend the life of the equipment.
4. Strong adaptability
Can handle a variety of water sources, such as tap water, acque sotterranee, seawater, ecc. Flexibly adjust specifications according to needs, suitable for home, commercial, industrial and other scenarios.
5. High stability
Key components such as RO membranes are durable and have stable performance. Low operating and maintenance costs and long service life.
6. Safety and hygiene
Fully enclosed treatment process to avoid secondary pollution. After strict testing and certification, it meets drinking water standards.
1.304 stainless steel process Using 304 stainless steel process, it is not afraid of corrosion, high temperature resistance, long service life, easy to clean, and good sealing.
2. Intelligent control Fully automatic control system, microcomputer intelligent control, no need for manual supervision, saving labor costs, simple operation, simple maintenance.
3. Vertical booster pump The vertical design occupies a small area and can be directly installed in the pipeline system to reduce the need for additional support. Low operating energy consumption.
4. Rich display instruments The equipment operation status can be detected at any time, with accurate measurement, stable performance and high safety.
-
Soluzione completa
Fornire ingegneria di progettazione di impianti interi dalla tecnologia del prodotto al trattamento delle acque, pretrattamento, soffiatura di bottiglia, riempimento, Capping, Coding, etichettatura, trasmettere, confezione, Magazzino intelligente, ecc. Secondo le esigenze dei clienti.
-
Tecnologia innovativa
Combiniamo in modo efficiente le ultime tecnologie del settore per sviluppare e trasformare le attrezzature per migliorare la capacità di produzione, Aiutarti a rimanere in prima linea nel settore e ottenere competitività del mercato.
-
Qualità e test
Hadof ha investito pesantemente nell'avanguato r&D, apparecchiatura avanzata di elaborazione e test. Proiettore digitale,Specchio endoscopio,Analizzatore di spettro portatile,Rilevatore di difetti ad ultrasuoni,Microscopio metallurgico e così via.
-
Servizi personalizzati
Personalizzeremo attrezzature e soluzioni in base al tuo sito, budget e altre esigenze specifiche per garantire che ogni dispositivo soddisfi perfettamente le tue esigenze e ti aiuti a crescere.
Mercati globali Come rinomato produttore di alimenti e bevande, Operiamo nei mercati globali e disponiamo di un sistema completo per fornire in modo efficiente i nostri prodotti ai clienti di tutto il mondo. Il nostro impegno per la qualità e la sicurezza si riflette nelle certificazioni a cui aderiamo, che garantiscono il rispetto degli standard statunitensi ed europei.
Per servire meglio i nostri clienti, Abbiamo stabilito filiali e uffici rappresentativi in luoghi strategici in tutto il mondo. Le nostre operazioni coprono la Russia, U.S.A., Indonesia, Chile, Colombia e Algeria.
+8615239453015WhatsApp
info@hadofmachinery.comE-mail
Ottieni una citazioneIndagine
Inserisci il contenutoRicerca
Fare clic per tornare in altoSUPERIORE